Logo-f

Program - Interactive (NEW!)

Week Tue. 03 Wed. 04 Thu. 05 Fri. 06 List

	Tue. 03	Wed. 04	Thu. 05	Fri. 06
08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00	Welcome cocktail and Dinner (Sponsor: TII) 17:00 - 21:15 (4h15) Welcome cocktail and Dinner (Sponsor: TII) Salon d'honneur Bus 21:15 - 21:45 (30min) Bus from Ecole Polytechnique to Massy Palaiseau	Bus 8:00 - 8:30 (30min) Bus from Massy-Palaiseau to Ecole Polytechnique Opening Ceremony 8:30 - 9:00 (30min) Opening Ceremony Amphi Gay-Lussac Keynote 9:00 - 10:20 (1h20) Keynote Amphi Gay-Lussac Eric Charkaluk (Session Chair) › Metal additive manufacturing: insights into controlling microstructure, defects and properties - Mark Easton* 09:00-09:40 (40min) › Magnetic Field-Assisted Direct Liquid Metal Deposition - Julie Gheysen, William Le Bas, Tyler Benkley, Xiaojiao You, Raphaël Charvet, Cyril Dénéréaz, Cyril Vogt, Andreas Mortensen 09:40-10:20 (40min) Coffee break 10:20 - 10:40 (20min) Coffee break Grand Hall Al alloys Ni and Multi-material alloys 10:40 - 12:40 (2h) Al alloys Amphi Gay-Lussac Julie Gheysen (Session Chair) › Two novel high-strength and high-productivity alloys for laser powder bed fusion: Mechanical properties of Scancromal® (Al-Cr-Mo-Sc-Zr) in comparison to Scalmalloy® - Barbara Agricola, Annegret Kerschenlohr, Eric Jägle, Frank Palm 10:40-11:00 (20min) › Unravelling the microstructure development and strengthening mechanisms of AMALLOY3D-HT, an aluminium grade developed for laser powder bed fusion and high-temperature applications - Giuseppe Del Guercio, Federico Bosio, Stuart Robertson, Paul Bagot, Souvik Sahoo, Maria Teresa Perez Prado, Nesma Aboulkhair 11:00-11:20 (20min) › An Al-Cr Based Alloy System Combining Fatigue Resistance, High Surface Quality and Cost-Effectiveness - Janina Schmidt, Lukas Langer, Heinz Werner Höppel, Ulrich Tetzlaff 11:20-11:40 (20min) › PBF-LB manufacturing and microstructural analysis of nanoalloyed Al5254 alloy - Irina Smolina, Konrad Gruber, Wojciech Stopyra, Marcin Kasprowicz, Michał Karoluk, Emilia Grochowska, Karol Kobiela 11:40-12:00 (20min) › Effect of heat treatments on the high temperature mechanical strength of a novel Al-Mn-Ni-Cu-Zr alloy designed for Laser Powder Bed Fusion - Tristan Lenoir, Bechir Chehab, Arthur Després, Jean-Jacques Blandin, Guilhem Martin 12:00-12:20 (20min) › Tool for Design of Alloys for Additive Manufacturing by Laser Powder Bed Fusion - Karin Frisk* 12:20-12:40 (20min) 10:40 - 12:40 (2h) Ni and Multi-material alloys Amphi Becquerel Eduard Hryha (Session Chair) › A Novel Approach to Produce Metal-Metal Composites by Leveraging Immiscibility: Laser Powder Bed Fusion of Nano-Silver Dispersed Titanium - Hamed Shokri, Silja-Katharina Rittinghaus, Janett Schmelzer, Jessica Bertrand, Bilal Gökce 10:40-11:00 (20min) › Interfacial reactions in multi-material DED printing of aluminum and nickel - Chanho Park, Haeju Jo, Wei Zhang, Hyunji Nam, Wookjin Lee 11:00-11:20 (20min) › FCC and BCC phases in 316L-CuCrZr multi-material additive manufacturing - Amir Jamili, Indranil Basu, Cyril Cayron, Steven Van Petegem, Jamasp Jhabvala, Daniel Weisz-Patrault, Joerg Loeffler, Roland Logé 11:20-11:40 (20min) › Laser powder bed fusion of In718/GRCop-42 bimetallic structures: effect of deposition order and process parameters - Alasdair Bulloch, Richard Hague, Christopher Tuck, Amanda Cruchley, Allin Groom, Marco Simonelli 11:40-12:00 (20min) › ABD®-1000AM: A highly processible superalloy for additive manufacturing, computationally designed for 1000°C applications - Solange Vives, Dominic Peachey, Yining He, Pimin Zhang, John Clark, Zara Hussain, Thomas Wagstaff, André Nemeth, David Crudden 12:00-12:20 (20min) › The Influence of microstructure on the hot ductility of AD730 manufactured by laser powder bed fusion. - Clement Richard, Tiphaine Giroud, Romain Bordas, Thibaut Froelinger, Didier Locq, Marc Thomas, Guilhem Martin, Arthur Després 12:20-12:40 (20min) Lunch 12:40 - 13:40 (1h) Lunch Salon d'honneur In process/in situ alloys/microstructure engineering Beam shaping + Modelling + Metamaterials 13:40 - 15:40 (2h) In process/in situ alloys/microstructure engineering Amphi Becquerel Mark Easton (Session Chair) › Designing LPBF microstructures with advanced thermal paths and in situ alloying - Roland Logé, Claire Navarre, Reza Esmaeilzadeh, Lucas Schlenger, Cyril Cayron, Vigneashwara Pandiyan, Jamasp Jhabvala, Eric Boillat, Patrik Hoffmann, Nicola Casati, Daniel Grolimund, Federica Marone, Steven Van Petegem 13:40-14:00 (20min) › In-situ Engineering of Microstructures During Metal Additive Manufacturing - Nima Haghdadi, Sophie Primig 14:00-14:20 (20min) › In-process alteration of Ti-6Al-4V microstructure during additive manufacturing - K. Abdellah Abdesselam, Steve Gaudez, Steven Van Petegem, Veijo Honkimäki, Manas V. Upadhyay 14:20-14:40 (20min) › STUDYING THE KINETICS OF IN-SITU OXIDE DISPERSION FORMATION RESULTING FROM REACTIVE PROCESS ATMOSPHERES - Christian Felber, Erin Yule, Eric Jägle 14:40-15:00 (20min) › Assessment of high-carbon steels processability by powder bed fusion - laser beam through microstructural characterization and hardness test - Rodolfo Batalha, Paulo Morais, Ana Cabral 15:00-15:20 (20min) › Tailoring the grain structure of pure Cu via in situ recrystallization in Electron Beam Powder Bed Fusion (EB-PBF) - Alexandre Margueret, Guilhem Martin, Lucas Varoto, Pierre Lhuissier 15:20-15:40 (20min) 13:40 - 16:00 (2h20) Beam shaping + Modelling + Metamaterials Amphi Gay-Lussac Kim Vanmeensel (Session Chair) › Probing the mechanisms of ductile fracture with random porous metamaterials - Gabriella Tarantino 13:40-14:00 (20min) › Fabrication of a single-crystal-like β structure with unique variant selection for a near-β Ti alloy through laser powder bed fusion using a flat-top laser beam - Tomonori Kitashima, Takanobu Hiroto, Makoto Watanabe 14:00-14:20 (20min) › Numerical simulation of melt flow and track morphology in laser powder bed fusion of 316L stainless steel - Yijie Liang, Zhongfu Cheng, Annelies Malfliet, Muxing Guo, Bart Blanpain 14:20-14:40 (20min) › An analytical approach to scanning parameter selection: adapting normalized enthalpy to complex geometries - Ignacio Rodriguez Barber, Maria Teresa Perez-Prado 14:40-15:00 (20min) › Defect sensitivity of LPBF-manufactured architected cellular materials with random pores - Selma Leonardi, Anne-Laure Helbert, Gabriella Tarantino 15:00-15:20 (20min) › Towards architected microstructures using advanced laser beam shaping in metal additive manufacturing - Reza Esmaeilzadeh, Jamasp Jhabvala, Lucas Schlenger, Eric Boillat, Roland Logé 15:20-15:40 (20min) › Influence of architecture on serrated flow appearance in additively manufactured Inconel 718 metamaterials - Souvik Sahoo, Zhi Chen, Shruti Banait, Dan Mordehai, Maciej Haranczyk, Maria Teresa Perez Prado 15:40-16:00 (20min) Coffee break 16:00 - 16:20 (20min) Coffee break Grand Hall Steels Post-process heat treatments 16:20 - 17:20 (1h) Steels Amphi Gay-Lussac Steve Gaudez (Session Chair) › Cyclic behaviour and microstructural evolution of metastable austenitic stainless steel 304L produced by laser powder bed fusion - Miroslav Šmíd, Daniel Koutný, Kateřina Neumannová, Zdeněk Chlup, Luboš Náhlík, Michal Jambor 16:20-16:40 (20min) › The effect of dislocation cell structures on phase transformations of metastable 304L steel processed by laser powder bed fusion - Michal Jambor, Christos Sofras, Jan Čapek, Efthymios Polatidis, Miroslav Šmíd 16:40-17:00 (20min) › Designing a wear-resistant tool steel for laser powder bed fusion - Konrad Kosiba, Daniel Wolf, Matthias Bönisch, Lukas Beyer, Uta Kühn, Sergio Scudino, Lars Giebeler, Julia Hufenbach 17:00-17:20 (20min) 16:20 - 17:20 (1h) Post-process heat treatments Amphi Becquerel Nima Haghdadi (Session Chair) › Effect of laser rescanning on thermal conductivity and mechanical properties of Al-1.2Fe alloy fabricated by laser-directed energy deposition - Haeju Jo, Wei Zhang, Wookjin Lee 16:20-16:40 (20min) › Effect of Hot Isostatic Pressing on the ability to heal cracks in 5xxx series aluminum alloys produced by Powder Bed Fusion - Laser Beam / Melting - Wojciech Stopyra, Michał Karoluk, Marcin Kasprowicz, Iryna Smolina, Konrad Gruber, Karol Kobiela, Emilia Grochowska 16:40-17:00 (20min) › Impact of heat treatments on microstructure and mechanical properties of γ/γ' Ni-based superalloys obtained by DED processes - Guillaume Burlot, Bertrand Max, Aurélien Prillieux, Arnaud Proietti, Marjolaine Sazerat, Romain Bordas, Emmanuel Saly, Alice Cervellon, Elise Ferreira, Jonathan Cormier 17:00-17:20 (20min) Break to rassemble in Amphi Gay-Lussac 17:20 - 17:30 (10min) Break to rassemble in Amphi Gay-Lussac Keynote 17:30 - 18:10 (40min) Keynote Amphi Gay-Lussac Christian Leinenbach (Session Chair) › Additive Manufacturing: An Invitation to Revisit the Role of Solutes - Guilhem Martin, Arthur Despres, Charlotte Mayer, Paraskevas Kontis, Maxence Buttard, Camille Pauzon, Béchir Chehab, Pierre Lhussier, Jean-Jacques Blandin 17:30-18:10 (40min) Poster presentations 18:10 - 18:50 (40min) Poster presentations Amphi Gay-Lussac Manas Upadhyay (Session Chair) › Modelling of precipitation kinetics in additively manufactured Ni-based superalloys using high-throughput thermodynamic and kinetic simulation approach - Ahmed Aslam 18:10-18:11 (01min) › About the use of inter-pass time and additional cooling system to control the microstructure and mechanical properties of duplex stainless-steel parts built by wire-arc additive manufacturing - Anas RASSANE 18:11-18:12 (01min) › PBF-LB/M PROCESS OPTIMIZATION AIDED BY MULTI-OBJECTIVE BAYESIAN OPTIMIZATION - Andrzej Pawlak 18:12-18:13 (01min) › Operando phase mapping during laser powder bed fusion of 316L and CuCrZr premixtures - Antonios Baganis 18:13-18:14 (01min) › Physics-Informed Prior Means and Kernels in Gaussian Process Thermal-Modeling for the Design of Printable Alloys - Brent Vela 18:14-18:15 (01min) › Temperature field numerical prediction during Directed Energy Deposition of a metallic bulk sample - Calogero Gallo 18:15-18:16 (01min) › Microstructural modification of LPBF-processed high manganese steel by laser parameter alternation - Daniel Koutný 18:16-18:17 (01min) › Improvement in the mechanical, and electrical properties due to aging of selective laser melted CuNi2SiCr - Debtanay Das 18:17-18:18 (01min) › Additive manufacturing of WC-Co ceramic/metal composites using binder jetting : from powder to sintered part properties - Erwan Marciano 18:18-18:19 (01min) › NON-DESTRUCTIVE ANALYSIS OF CHEMICAL TREATMENT OF INTERNAL SHAPED CHANNELS IN LPBF INCONEL 718 - Galina Kasperovich 18:19-18:20 (01min) › Modelling the microsegregation process in rapid solidification – Application to the IN718 alloy of aeronautical interest - Gildas GUILLEMOT 18:20-18:21 (01min) › LASER POWDER BED FUSION AND TESTING OF COMPRESSOR WHEELS FROM gamma-TITANIUM ALUMINIDE TI48-2-2 - Jan Haubrich 18:21-18:22 (01min) › Understanding Laser Powder Bed Fusion of Stainless Steel: Importance of Considering the Complex Marangoni Effect in Process Optimization - Jian Yang 18:22-18:23 (01min) › Approaching the Design of Additively Manufactured Functionally Graded Materials (FGMs) coupled with Thermodynamic Simulations. - Jorge Valilla Robles 18:23-18:24 (01min) › Study of Dievar and 20MnCr5 Powders for Gear Repair and Manufacturing by Laser Metal Deposition - Maria Azpeleta 18:24-18:25 (01min) › Comparing different techniques to physically simulate microstructures generated by wire-arc directed energy deposition - Martin Klein 18:25-18:26 (01min) › Microstructure control of additively manufactured Ni-based superalloy for improvement of high temperature ductility - Masaki Taneike 18:26-18:27 (01min) › Instrumented LMD-p chemically graded steels: link between thermal history and as built microstructure - Matthieu Bossy 18:27-18:28 (01min) › Hybrid Material Extrusion Additive Manufacturing Process - Mohamad Rostom 18:28-18:29 (01min) › European NUCOBAM project: First L-PBF stainless steel components to meet nuclear safety requirements - Myriam Bourgeois 18:29-18:30 (01min) › Influence of preheat temperature on the microstructure and hardness of IN718 alloy fabricated via electron-beam powder bed fusion - Nana Adomako 18:30-18:31 (01min) › Testing the state-of-the-art LPBF structures for mitigation of Eddy current losses in ferromagnetic cores - Olivier Marconot 18:31-18:32 (01min) › Modulation of the thermo-mechanical behaviour of stainless steels obtained by the wire arc additive manufacturing process, to control the in-service mechanical characteristics and optimize their forming. - Pauline Arnoulin 18:32-18:33 (01min) › Study of oxide nanoprecipitate formation mechanisms in 316 L stainless steel produced by rapid solidification processes: gas atomization and Laser Powder Bed Fusion (L-PBF)/ effect on impact toughness - BOUALOUACHE Salima 18:33-18:34 (01min) › DEDp Additive manufacturing of a TiC-renforced case-hardened steel matrix composite - Samuel El Haddaoui 18:34-18:35 (01min) › Changes in the morphology and chemistry of an oxidation-sensitive β-Ti alloy powder during the processing steps of additive manufacturing - Jan Haubrich 18:35-18:36 (01min) › Alloy combinatory synthesis by hybrid Cold Spray-Laser process - Lacondemine Tanguy 18:36-18:37 (01min) › Influence of a Static Magnetic Field on Direct Liquid Metal Deposition - William Le Bas 18:37-18:38 (01min) › Development of Rotation Continuous PBF 3D Printing System and Optimization of STS304 Process - Yongrae Kim 18:38-18:39 (01min) › Advanced Processing of High Entropy Alloys - Julia Chmielewska 18:39-18:40 (01min) › New Additive Manufacturing concept to develop bimaterials with optimal magnetic losses - Mohamed Arezki AMITOUCHE 18:40-18:41 (01min) Announcing AAMS 2025 18:50 - 19:00 (10min) Announcing AAMS 2025 Amphi Gay-Lussac Poster session + Dinner (Sponsor: AMAZEMET) 19:00 - 21:30 (2h30) Poster session + Dinner (Sponsor: AMAZEMET) Grand Hall Bus 21:30 - 22:00 (30min) Bus from Ecole Polytechnique to Massy Palaiseau	Bus 8:00 - 8:30 (30min) Bus from Massy Palaiseau to Ecole Polytechnique Keynote 8:30 - 9:50 (1h20) Keynote Amphi Gay-Lussac Andreas Mortensen (Session Chair) › Enabling Real-time Characterization of Laser-based Additive Manufacturing through Operando Techniques - Steven Van Petegem* 08:30-09:10 (40min) › Diffraction based residual stress analysis for laser powder bed fusion materials: challenges and benefits - Tatiana Mishurova, Jakob Schröder, Alexander Evans, Itziar Serrano, Giovanni Bruno 09:10-09:50 (40min) Coffee break 9:50 - 10:10 (20min) Coffee break Grand Hall Synchrotron + neutron studies I Bulk metallic glasses 10:10 - 12:10 (2h) Synchrotron + neutron studies I Amphi Gay-Lussac Steven Van Petegem (Session Chair) › Estimating elastic and thermal contributions from operando X-ray diffraction measurements during additive manufacturing - Steve Gaudez, Daniel Weisz-Patrault, K. Abdellah Abdesselam, Hakim Gharbi, Veijo Honkimaki, Steven Van Petegem, Manas V. Upadhyay 10:10-10:30 (20min) › Microstructural evolution of laser powder bed fused Inconel 718 during in-situ solution-aging heat treatments and the role of the scanning strategy - Bruno Ferrari, Andrea Fantin, Tatiana Mishurova, Ilaria Roveda, Reza Darvishi Kamachali, Alexander Evans, Leonardo Agudo Jácome, Itziar Serrano-Munoz 10:30-10:50 (20min) › Imaging the Cu solute redistribution into Al during operando additive manufacturing experiments - Steve Gaudez, Yunhui Chen, Andaç Öszoy, William Hearn, Alexander Rack, Steven Van Petegem 10:50-11:10 (20min) › Operando monitoring of multi-laser powder bed fusion process during high-speed synchrotron imaging - Samy Hocine, Sebastian Marussi, Andrew Farndell, Elena Ruckh, Rubén Lambert-Garcia, Anna Getley, Kwan Kim, Nick Jones, Maureen Fitzpatrick, Marta Majkut, Alexander Rack, Peter D. Lee, Chu Lun Alex Leung 11:10-11:30 (20min) › Understanding Cracking in Multi-material Laser Powder-bed Fusion via Operando Synchrotron X-Ray Imaging - Andaç Özsoy, William Hearn, Steve Gaudez, Yunhui Chen, Steven Van Petegem 11:30-11:50 (20min) › Synchrotron X-ray nano-tomography study of healing solutions for a Laser Powder Bed Fusion (LPBF) manufactured high-strength Al-Mg alloy - Sophie De Raedemacker, Julie Gheysen, Grzegorz Pyka, Bartlomiej Winiarski, David Tingaud, Julie Villanova, Romain Gautier, Marc Liu, Florent Hannard, Aude Simar 11:50-12:10 (20min) 10:10 - 12:10 (2h) Bulk metallic glasses Amphi Becquerel Maria Teresa Perez-Prado (Session Chair) › Controlling Crystallisation in an Additively Manufactured Fe-Based Soft Magnetic Metallic Glass - Samuel Gibbon, Marco Simonelli, Simon Sankare, Adam Clare, Alper Evirgen, James Rouse, Christopher Tuck 10:10-10:30 (20min) › Insight into nano- and global-scale optimization of printed Zr-based bulk metallic glass - Sepide Hadibeik, Emanuel Gingl, Lukas Schretter, Benedikt Bochtler, Christoph Gammer, Anton Hohenwarter, Florian Spieckermann, Jürgen Eckert 10:30-10:50 (20min) › INFLUENCE OF THICKNESS ON THE (MICRO)STRUCTURE AND THE MAGNETIC BEHAVIOR OF KUAMET6B2 THIN WALLS - Saumya Sadanand, Marcos Rodríguez-Sánchez, Amirhossein Ghavimi, Ralf Busch, Isabella Gallino, Paola Tiberto, Enzo Ferrara, Gabriele Barrera, Maria Teresa Perez-Prado 10:50-11:10 (20min) › Relating laser powder bed fusion process parameters to (micro)structure and to soft magnetic behaviour in a Fe-based bulk metallic glass - Marcos Rodríguez-Sánchez, Saumya Sadanand, Amirhossein Ghavimi, Ralf Busch, Paola Tiberto, Enzo Ferrara, Gabriele Barrera, Lena Thorsson, Hans Juergen Wachter, Isabella Gallino, Maria Teresa Perez-Prado 11:10-11:30 (20min) › 3D FEM mesoscale simulations of laser powder-bed fusion of a Zr-based bulk metallic glass - Jamasp Jhabvala, Navid Sohrabi, Eric Boillat, Toni Ivas, Güven Kurtuldu, Mihai Stoica, Jürgen Schawe, Claire Navarre, Jörg Löffler, Roland Logé 11:30-11:50 (20min) › Alloy development projects enabled by ultrasonic atomization - Bartosz Morończyk, Tomasz Choma, Jakub Ciftci, Bartosz Kalicki, Łukasz Żrodowski 11:50-12:10 (20min) Lunch + Coffee 12:10 - 13:30 (1h20) Lunch + Coffee Salon d'honneur Synchrotron + neutron studies II Microstructure modelling (+ validation) 13:30 - 15:10 (1h40) Synchrotron + neutron studies II Amphi Gay-Lussac Tatiana Mishurova (Session Chair) › Synchrotron X-ray Hierarchical Imaging of Phase Transformations during Laser Additive Manufacturing - Yunhui Chen, Artjom Bolender, Carsten Detlefs, Alexander Rack, Veijo Honkimaki, Peter Lee, Philip Withers, Mark Easton, Alexander Liehr, Manas V. Upadhyay, Thomas Niendorf 13:30-13:50 (20min) › In-situ synchrotron radiography of melt pool and powder bed dynamics in electron beam powder bed fusion - Nick Semjatov, Hans-Henrik König, Jihui Ye, Benjamin Wahlmann, Pidassa Bidola, Greta Lindwall, Carolin Körner 13:50-14:10 (20min) › Processability of nickel self-fluxing alloy by L-PBF - Anthony Ty, Yannick Balcaen, Morgane Mokhtari, Jordan Rigaud, Olivier Dalverny, Joel Alexis 14:10-14:30 (20min) › Evolution of Residual Stresses during Laser Powder Bed Fusion of Structural Steels - William Hearn, Steve Gaudez, Shieren Sumarli, Florencia Malamud, Steven Van Petegem 14:30-14:50 (20min) › Fabrication, Microstructure Analysis and In-Situ Monitoring of 316L-CuCrZr Multi-Material Structures made through Laser Powder Bed Fusion - Antonios Nikolaos Baganis, Florencia Malamud, Efthymios Polatidis, Vigneashwara Pandiyan, Christian Leinenbach 14:50-15:10 (20min) 13:30 - 15:10 (1h40) Microstructure modelling (+ validation) Amphi Becquerel Daniel Weisz-Patrault (Session Chair) › Intergranular stress and plastic strain formation during laser scanning of additively manufactured stainless steel: An experimentally-driven thermomechanical simulation study - Nikhil Mohanan, Juan Guillermo Santos Macías, Jérémy Bleyer, Thomas Helfer, Manas V. Upadhyay 13:30-13:50 (20min) › On the occurrence of rapid solidification during laser powder-bed fusion of metallic alloys - Damien Tourret, Jonah Klemm-Toole, Adriana Eres Castellanos, Amy Clarke, Alain Karma, Rouhollah Tavakoli, Adrian Boccardo, Muzi Li, Jon Molina-Aldareguia, Javier Llorca 13:50-14:10 (20min) › Thermodynamics of non-equilibrium growing interfaces - Solidification modelling in multicomponent alloys of interest for AM applications - Gildas Guillemot, Paul Martin, Chris Hareland, Peter Voorhees, Charles-André Gandin 14:10-14:30 (20min) › Statistical approch through fast model for microstructure prediction - Quentin Dollé, Daniel Weisz-Patrault, Ahmed El Bartali, Jean-François Witz 14:30-14:50 (20min) › Orientation, phase and internal stress mapping by TEM applied to additive manufacturing microstructures - Arthur Després, Maxence Buttard, Léo Monier, Muriel Véron, Edgar Rauch, Patricia Donnadieu, Guilhem Martin 14:50-15:10 (20min) Coffee break 15:10 - 15:30 (20min) Coffee break Grand Hall Micromechanisms during AM Microstructure of reinforced/composite materials 15:30 - 18:10 (2h40) Micromechanisms during AM Amphi Gay-Lussac Guilhem Martin (Session Chair) › Silicon mediated twin formation in laser direct energy deposited 316L stainless steel - Kewei Chen, Juan Guillermo Santos Macías, Nathalie Isac, Maxime Vallet, Louis Cornet, Manas V. Upadhyay 15:30-15:50 (20min) › Delta-Ferrite to Austenite Phase Transformation Pathways and Mechanical Properties in 2205 Duplex Stainless Steels Manufactured via Laser Powder Bed Fusion - Xinyi He, Zipeng Xu, Charlie Kong, Hao Wang, Xiaozhou Liao, Greg Rohrer, Simon Ringer, Nima Haghdadi, Sophie Primig 15:50-16:10 (20min) › Insights into direct aging of 17-4 PH stainless steel manufactured via laser powder-bed fusion - Vitor Rielli, Bernd Schulz, Sophie Primig 16:10-16:30 (20min) › Grain boundary engineering in stainless steel 316L via controlling laser powder-bed fusion process parameters - Ming Luo, Hao Wang, Xiaozhou Liao, Simon Ringer, Nima Haghdadi, Sophie Primig 16:30-16:50 (20min) › Microstructure Evolution of LPBF Produced Medium Manganese Steel - Bugra Köksal, Leoni Hübner, Christian Haase, Thomas Niendorf 16:50-17:10 (20min) › Overlay Dilution Prevention Method in a Single Step L-DED Process - Jon Arruabarrena, Enara Mardaras, Garikoitz Artola, Ana Fernandez, Rodolfo Gonzalez, Xabier Lasheras* 17:10-17:30 (20min) › Directed Energy Deposition of titanium alloys for biomedical application - Vladimir Popov, Eyal Sabatani, Lynn Cohen, Inbar Sommer, Shir Batat, Noam Eliaz 17:30-17:50 (20min) › Portevin-Le Chatelier effect in 316L stainless steels processed by LPBF - Sylvain Depinoy, Ivan Lambert, Veronica Arias, Kaiwei Wu, Jean-Christophe Teissedre, Cécilie Duhamel 17:50-18:10 (20min) 15:30 - 18:10 (2h40) Microstructure of reinforced/composite materials Amphi Becquerel Eric Jägle (Session Chair) › Role of carbides in grain growth mitigation in additive manufacturing of Inconel 718 - Konrad Gruber, Wojciech Stopyra, Karol Kobiela, Philipp Kohlwes, Jan Čapek, Markus Strobl, Efthymios Polatidis, Ingomar Kelbassa 15:30-15:50 (20min) › Site-Specific Fabrication of Metal Matrix Nanocomposites via Laser Directed Energy Deposition: Efficacy of Direct Nanoparticles Injection and Laser-Induced Remelting Techniques - Akash Aggarwal, Christian Leinenbach, Marc Leparoux 15:50-16:10 (20min) › Impact of TiC Particles on the Thermal Evolution during PBF-LB Manufacturing of Aluminum MMCs - Raphael Freundl, Eric Jägle 16:10-16:30 (20min) › Impact of nano-reinforcement addition on LPBF processability and properties of AlSi10Mg/B4C nanocomposites - Abdelrahman Elsayed, Ivo Šulák, Frederike Brasche, Ulrich Krupp, Christian Haase 16:30-16:50 (20min) › Effect of combined additions of Sc, Zr and Ti on hot-cracking resistance and precipitation behaviour in Al-Mg alloy processed by L-PBF - Federico Larini, Riccardo Casati, Silvia Marola, Maurizio Vedani 16:50-17:10 (20min) › In-situ alloying of AlSi10Mg-TiN through LPBF additive manufacturing - Mohammadreza Jandaghi, Johan Moverare 17:10-17:30 (20min) › Obtaining parts through selective laser melting (SLM) with metallic or metal-ceramic powders surface-modified using fluidized bed technology. - Neyder Aleixer Sandoval Vargas, Alejandro Santos Villanueva, Joaquín Rams, Belen Torres, Pilar Rodrigo Herrero, Sandra Cifuentes, Sergio Sánchez-Delgado, Daniel Serrano Garcia, Sophia Tsipas 17:30-17:50 (20min) › Fracture behaviour of a Ni-20 wt.%Cr binary alloy produced by Laser Powder Bed Fusion: Influence of the sample orientation and rotation angle between layers - Sélia Benmabrouk, Benoit Vieille, Eric Hug, Clément Keller 17:50-18:10 (20min) Bus 18:10 - 19:45 (1h35) Bus from Ecole Polytechnique to Gala Dinner Gala dinner 19:45 - 23:00 (3h15) Gala dinner Cocktail, dinner and cruise on the Seine river Bus 23:00 - 23:55 (55min) Bus from Conference banquet to Massy Palaiseau and Ecole Polytechnique	Bus 8:00 - 8:30 (30min) Bus from Massy Palaiseau to Ecole Polytechnique Keynote 8:30 - 9:50 (1h20) Keynote Amphi Gay-Lussac Roland Logé (Session Chair) › Intelligentsia of Nano-Architected Hierarchical Materials - Julia Greer* 08:30-09:10 (40min) › Utilizing in-situ characterization techniques to probe the heat treatment response and micromechanical performance of LPBF processed and heat-treated Ti-6Al-4V - Kim Vanmeensel, Matthias Bönisch, Martin Diehl, Marc Seefeldt, Tijmen Vermeij, Marc Geers, Johan Hoefnagels, Pushkar Dhekne 09:10-09:50 (40min) Coffee break 9:50 - 10:10 (20min) Coffee break Grand Hall EBM + LPBF WAAM/WaDED + LDED 10:10 - 12:10 (2h) EBM + LPBF Amphi Gay-Lussac Eric Charkaluk (Session Chair) › Preliminary study of the influence of Silicon addition in Molybdenum processed by Electron Beam Powder Bed Fusion - Samuele Di Sturco, Giulio Marchese, Mariangela Lombardi, Paolo Fino, Sara Biamino 10:10-10:30 (20min) › Processing of refractory metals by electron beam powder bed fusion - Benjamin Wahlmann, Yong Chen, Raja Abdul Baseer, Carolin Körner 10:30-10:50 (20min) › Electron beam powder bed fusion process monitoring by in-melt electron analysis - Jinghao Xu, Prithwish Tarafder, Anton Wiberg, Huotian Zhang, Johan Moverare 10:50-11:10 (20min) › The effect of scanning strategies on the microstructure of 316L stainless steel processed by electron beam powder bed fusion - Prithwish Tarafder, Jinghao Xu, Anton Wiberg, Johan Moverare 11:10-11:30 (20min) › PBF-LB of a non-weldable Ni-base Superalloy: role of scan strategies on hot cracking - Ahmed Fardan Jabir Hussain, Håkan Brodin, Eduard Hryha 11:30-11:50 (20min) › A journey into alloy design, development, and industrialisation of custom Al alloys for Additive Manufacturing applications - Federico Bosio, Giuseppe Del Guercio, Chinmay Phutela, Rafael Casas, Tomasz Choma, Bartosz Kalicki, Alexander Pesl, Maria Teresa Perez Prado, Nesma Aboulkhair 11:50-12:10 (20min) 10:10 - 12:10 (2h) WAAM/WaDED + LDED Amphi Becquerel Gabriella Tarantino (Session Chair) › In-process alloying of stainless steels using Dual Wire Arc Additive Manufacturing - Implications for single-strand geometry, deformations and residual stresses - Bruno Courant, Juliette Théodore, Baptiste Girault, Laurent Couturier, Emmanuel Bertrand, David Gloaguen, Grégoire Bazin, Thilo Pirling, Sandra Cabeza, Efthymios Polatidis 10:10-10:30 (20min) › A novel high-strength Al-6Zn-4Ni-2Mg-1Cu-Fe alloy for directed energy deposition - Thomas Klein, Petra Spoerk-Erdely, Aurel Arnoldt, Norbert Enzinger, Martin Stockinger, Clemens Simson 10:30-10:50 (20min) › A novel high-temperature Ti-alloy for wire based directed energy deposition - Ehsan Farabi, David Obersteiner, Michael Musi, José Neves, Thomas Klein, Sophie Primig 10:50-11:10 (20min) › Investigations of TRIP and TWIP mechanisms in titanium AM alloys - José Neves, Johann Grillitsch, David Holec, Thomas Klein 11:10-11:30 (20min) › Microstructure of thin-walled structure with non uniform scanning speed - Michèle Bréhier, Christophe Tournier, Daniel Weisz-Patrault 11:30-11:50 (20min) › Microstructure and mechanical properties of additively manufactured Inconel 617 for high-temperature applications in the nuclear industry - Tomasz Stasiak*, Jaroslaw Jasinski, Udisien Woy, Magdalena Wilczopolska, Marcin Kowal, Jozef Rzempoluch, Lukasz Kurpaska, Jacek Jagielski 11:50-12:10 (20min) Lunch + coffee + closing remarks 12:10 - 14:00 (1h50) Lunch + coffee + closing remarks Salon d'honneur Bus 14:00 - 14:30 (30min) Bus from Ecole Polytechnique to Massy-Palaiseau

Online user: 2

Privacy

Loading...